At Rembrand, we are dedicated to helping our customers achieve their DIY dreams. Whether you’re putting up a timber fence or decking in your garden, replacing a kitchen worktop, or even transforming your home with a new staircase, we have all of the helpful hints and tips to aid you.
When starting a new DIY project, safety should be your first concern, no matter the plan or goal. While accidents can happen, you can largely prevent them by being cautious, responsible and by following our basic DIY safety tips.
Our Tips for DIY Protection
Many DIY gurus will make the mistake of thinking if your creation is for outdoor use, that safety doesn’t need to be as important. But, if you’re sawing wood outside for a fence or play area for your children, there is an even greater risk of inhaling sawdust that is being carried by the wind. This is why we suggest that no matter where you are when cutting timber or wood, that you wear a high-quality dust mask! They should also be worn when using hazardous materials like glass or spray paint.
Another tip that you should follow when cutting wood is to always wear thick gloves and goggles. Gloves will prevent your hands from getting any splinters, and the goggles will stop sawdust from entering your eyes. While these issues may sound trivial, you can risk serious eye damage without proper protection. We also advise that you do not rely on face shields, in place of goggles, that don’t form a seal against your face as they are often completely open at the bottom, which means that dust and smaller chips can still fly in behind the shield.
More Tips for Protection
- Wear earplugs when working with loud machinery.
- Always have a first aid kit to hand. Accidents can happen at any time.
- Ensure that the area you are working in is well ventilated in preparation for the job to begin.
Putting a Stop to Potential Hazards
Of course, when it comes to preventing hazards from getting in the way of your DIY project, there are a number of basic tips you should follow. These include taking your time with your work, as rushing is likely to cause accidents and you may do a poor job. As well as, taking care around children. If you’re crafting a playhouse or area for your children from timber, then be aware of any children around you who may be at risk. Make sure that tools and chemicals are out of reach and you know where little ones are at all times.
Follow our tips for more ways to prevent hazards below.
- Try to keep a clean and organised workspace.
- Make sure any room which you are painting is kept well ventilated or when using any substance that creates toxic fumes.
- Never smoke while painting or around freshly painted surfaces.
- Switch off the power in a building before doing work on electrical circuits or connections and always wear rubber-soled shoes.
- When using ladders, never lean to one side. Always make sure they are set up and stored according to the manufacturer’s instructions.
- Never attempt DIY when under the influence of intoxicants such as alcohol or drugs.
- Never try to answer your phone and do DIY at the same time. Choose one or the other; distractions cause accidents.
- If you are unsure, then consult a professional.
- When the job is done ensure you store your tools away safely.
Using the Right Tools
When beginning your DIY projects, you should always make sure you have the correct tools for the job. Making sure your tools are correct will improve the quality of work that you do massively and also make the process easier and more efficient. For example, if you’re doing work in the kitchen by replacing worktops or adding in a breakfast bar or new splashback surfaces, then it’s imperative that you use the right tools to ensure our new kitchen area is not going to fall apart.
We have put together some top tips for tools that will help you to achieve your DIY dreams
- Only use the correct tools for the job.
- Ensure you know how to use the tools needed for the job, prior to starting.
- Avoid cheap tools; instead, invest in high-quality tools as these will be safer and more effective for the job.
- When using knives, keep blades sharp and always cut away from your body.
- Store tools safely in a box or secured in a rack. Make sure they are always away from children.
- When operating a drill, avoid wearing jewellery, loose clothing or anything that could get caught in the machine.
- Never leave active power tools unattended.
- Never use power tools in the rain.
Now that you have read through all of our handy hints and tips, you are ready to get started on your DIY! At Rembrand, we understand the importance that high-quality materials have on making sure your DIY project turns out just right, so why not explore our wide collection of materials and supplies available? We are more than just timber and are proud to offer a wide range of premium sheet materials, including plywood, chipboard and pine board. As well as a selection of high-quality staircases, flooring and doors and windows that are of the highest quality and will transform your home.